Secure cooktop to countertop electrical connection – Thermador CIT365DS User Manual
Page 7
Advertising
8
The cooktop should be secured to the countertop using the holdĆdown brackets
provided.
Prior to inserting cooktop into cutout, turn cooktop upside down and attach
brackets to the burner box using the washers and screws.
Place cooktop into cutout. Insert clamping screw into the bracket and secure
cooktop to countertop.
Use a wood block to protect fragile countertop materials.
Attach flexible conduit to the junction box.
Connect the cooktop lead wires to the junction box supply wires in proper phase:
black (L1) to black
red (L2) to red
green wire to ground
If the cooktop is installed and connected as specified above, it will be completely
grounded in compliance with the National Electrical Code.
Secure cooktop to
countertop
Electrical connection
NOTE:
Advertising
This manual is related to the following products: