Toshiba A200 - Manual (Page 77)

User’s Manual 5-3
The Keyboard
Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key.
Hotkeys
Fn + ESC Mute – Turns the volume on and off.
Fn + F1 Lock – Enters "Lock computer" mode. To restore your
desktop, you need to log on again.
Fn + F2 Power Plan Mode – Displays the power save modes
and lets you change the power settings
Fn + F3 Sleep – This hot key switches the system to Sleep mode.
Fn + F4 Hibernate – This hot key switches the system to
Hibernate mode.
Fn + F5 Output – Changes displays.
Default resolution for simultaneous mode is set to WXGA (1280 × 800). If
you connect an RGB (Monitor) that is not WXGA resolution, change it in
"Display Properties".
Fn + F6 Brightness (decreases)
Fn + F7 Brightness (increases)
Fn + F8 Wireless – Pressing this hot key allows you to switch
between active wireless devices if the wireless
communication switch is switched on.
Fn + F9 TouchPad/Dual Mode Pad – Enables or disables the
TouchPad/Dual Mode Pad function.
Fn + F10 Cursor Keypad On/Off – This hot key enables/disables
the embedded cursor keypad. See chapter 3 for more
information.
Fn + F11 Numeric Keypad On/Off – This hot key
enables/disables the embedded numeric keypad. See
chapter 3 for more information.
Fn + F12 Scroll Lock On/Off
Fn + Space Change Resolution – Each time when you press the
these hot keys, the resolution will change depending on
the specification of the LCD display panel-with a WXGA
system. You can change the resolution between
800 × 600 pixels and 1024 Ч 768/1280 Ч 800 pixels.