Toshiba A200 - Manual (Page 63)

User’s Manual 4-15
Operating Basics
Removing compact discs
To remove the disc, follow the steps below.
1. To pop the drawer partially open, press the eject button. Gently pull the
drawer out until it is fully opened.
2. The disc extends slightly over the sides of the drawer so you can grasp
it. Hold it gently and lift it out.
Removing a disc
3. Push the center of the drawer to close it. Press gently until it locks into
place.
Buttons
The Internet button and the CD/DVD button can be assigned other
functions by Button Support Utility.
1. Move mouse cursor and reach the top of desktop screen. The back
cards and white cards appear. Click "Button support" white card.
2. "Button Support" white card fully appears. After double click this card,
the dialog for changing button function is displayed.
Do not press the eject button while the computer is accessing the disc
drive. Wait for the optical disc indicator to go out before you open the
drawer. Also, if the disc is spinning when you open it, wait for it to stop
before you remove it.
n When the drawer pops open slightly, wait a moment to make sure the
disc has stopped spinning before pulling the drawer fully open.
n Turn off the power before you use the eject hole. If the disc is spinning
when you open the drawer, it could fly off the spindle and cause injury.