Toshiba A200 - Manual (Page 82)

User’s Manual 6-2
Power and Power-Up Modes
Power indicators
As shown in the above table, the Battery, DC IN and Power indicators alert
you to the computer's operating capability and battery charge status
Battery indicator
Check the Battery indicator to determine the status of the battery. The
following indicator lights indicate the battery status.
AC adapter
not
connected
Battery
capacity is
above low
battery trigger
point
• Operates
• LED: Battery off
DC IN off
Battery
capacity is
below low
battery trigger
point
• Operates
• Alarm sounds (this
function depends on how
the computer is
configured)
• LED: Battery flashes
amber
DC IN off
Battery
capacity
exhausted
Computer goes into
Hibernation or shuts down
(depending on the
TOSHIBA Power Saver
setting)
No battery
installed
• No operation
• LED: Battery off
DC IN off
Power on Power off (no operation)
* The LED is dependent on the model you purchased.
Flashing Amber The battery charge is low. The AC adapter must
be connected to recharge the battery
Amber Indicates the AC adapter is connected and is
charging the battery.
Blue Indicates the AC adapter is connected and the
battery is fully charged.
No light Under any other conditions, the indicator does
not light.