Toshiba A200 - Manual (Page 92)

User’s Manual 6-12
Power and Power-Up Modes
Installing the battery pack
To install a battery pack, follow the steps below.
1. Turn the computer's power off.
2. Disconnect all cables connected to the computer.
3. Hold the battery pack so that the label faces down and the connectors
on the battery face the connectors on the computer.
4. Gently slide the battery into the battery bay until the latch clicks into
place.
Installing the battery pack
TOSHIBA Password Utility
The TOSHIBA Supervisor Password Utility provides two levels of password
security: User and Supervisor.
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
1
2
Passwords set in TOSHIBA Supervisor Password Utility are different from
the Windows ® login password.