Toshiba SATELLITE A10 - Manual (Page 69)

69 Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.3
11 Turn the computer over and reconnect any cables you
removed.
12 Turn on the computer.
To verify that the computer correctly recognizes the
memory, click Start, Control Panel and click
Performance and Maintenance. Click System to view
the recognized memory.
13 If the computer does not recognize the memory, shut
down the computer, remove the memory slot cover, and
make sure the memory module is seated properly, as
described in step 8.
Removing a memory module
1 Follow steps 1 through 5 in “Installing additional
memory (optional)” on page 65 .
2 Gently push the memory clips outward until the memory
module pops up.
Removing the memory module
3 Gently pull the memory module diagonally to remove it
from the slot.
4 Complete the procedure by following steps 9 through 13
in
“Installing additional memory (optional)” on page 65 .