Texas Instruments 5000 - Manual (Page 61)

2
Installation
2.1 Introduction
This section contains unpacking and preparation for use instructions for
the TM5000 Series Notebook Computers. This includes:
•
Removing the computer and all manuals, options and accessories from
the shipping container(s) (Paragraph 2.2)
•
Installing Internal Notebook Options (Paragraph 2.3)
•
Installing External Notebook Options (Paragraph 2.4)
•
Installing Battery Packs (Paragraph 2.5)
•
Installing Desktop Devices (Paragraph 2.6)
•
Installing the AC Adapter (Paragraph 2.7)
•
Checking Out the System (Paragraph 2.8)
•
Configuring the System (Paragraph 2.9)
•
Making Backups of System Software (Paragraph 2.10)
•
Loading Application Software (Paragraph 2.11)
•
Securing Notebook to Workstation (Paragraph 2.12)
2.2 Unpacking Instructions
The packaging diagram for the notebook computer is shown in Figures 2-1
and 2-2. Unpack the computer using the following instructions:
1. Carefully cut the tape that seals the top flap of the shipping carton.
2. Remove the computer and the accessories Carton from the main shipping
carton (See Figure 2-1).
3. Remove all protective coverings from the computer.
4. Remove the holding tape and open up the accessory box; remove the
contents.
n
Note: Save the two shipping containers and packaging for later reuse.
Installation 2-1