Tekxon Technology X52 - Manual (Page 29)

27
6 Installing the software
6.1 Supported operating systems
• Windows 98 (including Second Edition)
• Windows Me
• Windows 2000
• Windows XP
• Windows Vista
Microsoft Windows 98, Windows 98 SW, Windows 2000 Professional, Windows ME ,
Windows XP or Windows Vista systems are pre-installed.
6.2 Installing the driver
Driver installation is similar for the various Windows systems. When specifying the path,
you must simply select the driver in the CD-ROM drive.
The camera has two USB driver modes: Web Cam and DSC. DSC is the default setting.
The procedure for installing the drivers for each of the two modes is described below.
6.2.1 Installing the driver in DSC mode
When the camera is in DSC mode, Windows ME, 2000 XP and Vista
automatically recognise the camera and no driver must be installed. The
description of the driver installation procedure refers to Windows 98.
1.
When the camera is connected to the computer in DSC
mode, the Found New Hardware Wizard appears on your
PC monitor.
Click “Next” to open the next window