Tyan Computer THUNDER N3600T - Manual (Page 8)

8
http://www.TYAN.com
Chapter 2: Board Installation
You are now ready to install your motherboard. The mounting-hole pattern of
the S2937 matches the E-ATX specifications. Before continuing with
installation, confirm that your chassis supports an E-ATX motherboard.
How to install our products right… the first time!
The first thing you should do is to read this user’s manual. It contains important
information which will make configuration and setup much easier. Here are
some precautions you should take when installing your motherboard:
(1) Ground yourself properly before removing your motherboard from the
antistatic bag. Unplug the power from your computer power supply and
then touch a safely grounded object to release static charge (i.e. power
supply case). For the safest conditions, TYAN recommends wearing a
static safety wrist strap.
(2) Hold the motherboard by its edges and do not touch the bottom of the
board, or flex the board in any way.
(3) Avoid touching the motherboard components, IC chips, connectors,
memory modules, and leads.
(4) Place the motherboard on a grounded antistatic surface or on the
antistatic bag that the board was shipped in.
(5) Inspect the board for damage.
The following pages include details on how to install your motherboard into your
chassis, as well as installing the processor, memory, disk drives and cables.
NOTE
DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN
DAMAGED.