Toshiba SD-P1707SR - Manual (Page 58)

58
Function Settings
Audio
E.A.M. DVD-V VCD CD
Normal:
Normal sound.
3D:
To obtain expansive virtual surround sound effects from
just two speakers.
Note
• Pressing the E.A.M. button on the remote control also allows
you to achieve the same setup.
D.R.C. DVD-V VCD CD
On :
Dynamic range is reduced.
Off :
Full dynamic range is maintained.
Notes
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Control may differ depending on
the DVD disc.
Digital Out DVD-V VCD CD
Bitstream:
Select when connected to an amplifi er equipped with a
Dolby Digital, DTS, MPEG1 or MPEG2 decoder.
The player outputs digital audio signal in the bitstream
format when you play a DVD video disc recorded in
the Dolby Digital, DTS, MPEG1 or MPEG2 recording
system.
Analog 2ch:
Select when connected to a TV or stereo system via the
analog audio jacks.
PCM:
Select when connected to a 2 channel digital stereo
amplifi er.
The player outputs sounds in the PCM 2ch format
when you play a DVD video disc recorded on the Dolby
Digital, MPEG1 or MPEG2 recording system.
Customizing the function settings (continued)
SD-P1707SR_P53-76.indd 58 07.3.8 8:24:36 PM