Toshiba 19W330DB - Manual (Page 11)

English - 10 -
Analogue Tuning and programme sorting
Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the
aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on page 4.
When TV (Analogue TV) is selected for the first time;
the A.P.S. screen will appear.
Auto. Programming System
Language English
Country UK
Teletext region West Europe
Check the antenna cable
Start: Ok Exit: Exit
Use the Up or Down button to highlight the Language,
Country and Teletext region items. Press the Left or
Right button to adjust the highlighted item. Then press
the OK button to start tuning.
 The television will start to search for available stations.
Auto. Programming System
APS is running: 78%
Exit: Exit
You must allow the television to complete the search.
When the search is complete the television will automati-
cally select programme position 1. This may not be a clear
picture or the signal may be weak, so the station order can
be changed using program table which will appear on the
screen.
P01
P01 BBC 1
P02 C 04
P03
P13
P12
P11
P04 P14
P05 P15
P06 P16
P07 P17
P08 P18
P09 P19
P10 P20
Program Table
Delete
Name Move
A.P.S
Exit: Exit
With the list of stations now showing use the Up or
Down button to highlight the station you want to move
and press the GREEN button.
Use the Up or Down button to move through the list to
the preferred position, as you do so the other stations
will move to make room, then press the GREEN button
again. The selected station will be moved to the new
position.
Repeat as necessary, then press EXIT.
If the television cannot be connected to a media re-
corder/decoder with a SCART lead or if a station on
another system is required, a programme position can
be manually tuned in (see page 11).