Sound adjustment, Setting the mts (multi-channel tv sound), Selecting the dual 1 or dual 2 mode – Toshiba VX1A00054000 User Manual
Page 18: Selecting the stereo programs 1, Selecting the bilingual programs 1, Adjusting the sound quality 1
Toshiba 5257Z3500A(E)
18
Using the TV’s features
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize stereo/bilingual
programs depending on the broadcast signal.
1
Press
M, then press or to display the SOUND
menu.
2
Press
or
to select
MTS, then press or to select
Auto or Mono.
Mono mode
If you experience noise or poor reception of any stereo/
bilingual program, set the
MTS mode to Mono.
Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular program on whose
channel reception is usually good, try setting MTS mode to
Auto, then switch
g
to
e
Mono (monaural) (
-
page 18).
Selecting the dual 1 or dual 2 mode
You can hear only dual 1 or dual 2 sound selected, whenever
bilingual programs are received.
1
Press
M, then press or to display the SOUND
menu.
2
Press
or
to select
Dual, then press or to select
Dual 1 or Dual 2.
Notes:
• When the MTS setting is in Mono mode, the Dual menu is
not selectable.
• The Dual menu setting status remains even if the TV is
turned off.
Selecting the stereo programs
1
When a stereo program is received, d
Stereo appears.
2
Press
g to select the stereo/monaural mode.
d
Stereo and e Mono appear cyclically on the screen.
Selecting the bilingual programs
1
When a bilingual program is received, j
Dual appears.
2
Press
g to select the sound to be heard. The sound
differs according to the transmission system: NICAM or
German stereo/bilingual broadcast.
Note:
These settings are not stored in the TV memory.
Adjusting the sound quality
1
Press
M, then press or to display the SOUND
menu.
2
Press
or
to select an item you want to adjust, then
press or to adjust the settings as required.
Bass
Treble
SOUND 1/2
MENU
Back Watch
TV
EXIT
Headphone
Dual
Headphone level
Mode 1
MTS
Auto
Dual 1
0
0
Stereo
Display
Sound to be heard
NICAM
German stereo/
bilingual broadcast
j Dual 1
Sub I sound
Main sound
J Dual 2
Sub II sound
Sub sound
e Mono
Main sound
—
Selection
Pressing
Bass
weaker
stronger
Treble
weaker
stronger
Balance
decreases the right
channel
decreases the left
channel
Dual 1
Bass
Treble
SOUND 1/2
MENU
Back Watch
TV
EXIT
Headphone
Dual
Headphone level
Mode 1
MTS
Auto
Dual 1
0
0
Bass
0
5257Z3500.book Page 18 Wednesday, October 24, 2007 6:34 PM