Telex PH-200A5 - Manual (Page 2)

PH-200 Specifications
Connector Termination
PH-200: XLR 4-pin Female
PH-200A5: XLR 5-pin Female
PH-200PT: Stripped Wire
PH-200R: XLR 4-pin Male
PH-200R5: XLR 5-pin Male
Type
PH-200: Dual Sided Monaural
PH-200A5: Dual Sided Stereo
PH-200PT: Dual Sided
PH-200R: Dual Sided Monaural
PH-200R5: Dual Sided Stereo
Mic Type
Dynamic Noise-Canceling
Mic Sensitivity
-65dBV/Pa @1cm
Mic Frequency Range
150Hz - 8kHz
Mic Impedance
200Ω
Speaker Sensitivity
97dB SPL @1kHz, 1mW
Speaker Frequency Range
500Hz - 4kHz
Speaker Impedance
PH-200: 150Ω
PH-200A5: 300Ω per side
PH-200PT: 300Ω per side
PH-200R: 150Ω
PH-200R5: 300Ω per side
Weight
18oz. (not including cord)
Cord Length
6 ft.
Ordering Information
PH-200
Dual-Sided Headset with Flexible Dynamic Boom Mic
& A4F Connector
Catalog Number: 301581-002
PH-200A5
Dual-Sided Headset with Flexible Dynamic Boom Mic
& A5F Connector
Catalog Number: 301581-004
PH-200PT
Dual-Sided Headset with Flexible Dynamic Boom Mic
& Pigtail Termination
Catalog Number: 301581-006
PH-200R
Dual-Sided Headset with Flexible Dynamic Boom Mic
& A4M Connector
Catalog Number: 301581-003
PH-200R5
Dual-Sided Headset with Flexible Dynamic Boom Mic
& A5M Connector
Catalog Number: 301581-005
This specifications information is preliminary and is subject to change without notification.
Brand names mentioned are the property of their respective companies.
Contact Information
Telex Communications, Inc.
12000 Portland Avenue South
Burnsville, Minnesota 55337
Telephone: 877·863·4169
Fax: (800) 323-0498
Form Number: LIT000206000 Rev A
Date: December, 2007