Weighing operation, 1 weighing operation – Toshiba TEC SL-9000N-FFH-QR User Manual

Page 63

Advertising
background image

13. OPERATING PROCEDURES

13.1 WEIGHING OPERATION

13- 2

13.1 WEIGHING OPERATION

Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH

The weigh mode is used to weigh a commodity and to issue the label. The label contains data such as a
weight, unit price (price per weight) and total price (calculated as a result of the weighing operation). The
following is a basic operation seen at the sales floor of a store or at a back room where different kinds and
weights of commodities are repacked. Pressing the [VOID] key subtracts the last entry from the memory.
Example) When PLU #100 and an unit price of $8.00 are set in the speed key #12.

NOTES:
1. Pressing a speed key to which no PLU data has been assigned will result in an error. In this case, press the

key, then press a speed key to which PLU data has been assigned.

2. To change between AUTO and MANUAL, follow the procedure provided in section 13.9.
3. If a unit price exceeding 4 digits is obtained by multiplying by 2 or 4 (when pressing the

key or

key), the unit price will be 0.

4. key is available only when the scale is a kg scale or operated on kg base.
5. When the , or key is pressed, the unit price does change on the display.
6. When the “compulsory tare” is selected, a tare must be subtracted in a weighing operation, otherwise an error

message “TARE REQUIRED” will be displayed when the following operation has been done:

Manual mode: Pressing the key.
Auto mode: Placing a commodity on the platter.
Floating vendor mode: Pressing the key.

When a “TARE REQUIRED” is displayed, refer to Section 13.6 to follow the proper weighing procedure.

Enter the PLU #.

Press the
speed key.

Place a commodity
on the platter.
(Ex. 1.000 lb.)

The label is issued

The unit of measure can be changed
for CA/QR model only.

LB Ö kg

Available only when the initial
setting # 5-6 is set to 1.

: AUTO

MANUAL :

Press when canceling
the last sales.

<REG.> MANU. WEIGH
T-BONE STEAK

Press :

C

1

0

0

PLU

12

LB

kg

kg scale

lb scale

VOID

1/2 lb

1/4 lb

100 g

1/2

1/4

100 g

(Sample label)

PRT

*

PRT/*

Vendor

lb

UNIT/$

TOTAL $

1.000

8.00

8.00

1/2 lb

1/4 lb

100 g

TEC STORE

(TEL) 0123-45-6789

Advertising
This manual is related to the following products: