Toshiba TEC SL-9000N-FFH-QR User Manual
Page 87
15. ERROR MESSAGE TABLE
15. ERROR MESSAGE TABLE
15- 2
Label lssue Mode
Report and Reset Mode
Message
Cause
Solution
DATA ENTRY ERROR
Error in key input.
Press the
key, and re-input the right
data.
PLU NOT FOUND
The PLU # being called out is
not registered.
Press the
key, and check the PLU #.
TOTALS OVERFLOW
GRAND TOTAL or PLU TOTAL
memory has been exceeded at
the time of issuing a label.
Press the
key, then the
key and
select ‘RESET’. Then sum up the
exceeded memory.
MEMORY WILL BE
FULLED
The machine judges the
memory is full before
designated number of media
are printed in Batch mode.
Press the
key, then the
key and
select ‘RESET’. Then sum up the
exceeded memory.
PLU DATA ERROR
Error in the PLU data.
Press the
key, and reprogram PLU
data.
PRT FAILURE DETECTED Printer trouble.
Media end.
1. Check that the label and print head are
set correctly.
2. If the label home position is misaligned,
press the
key.
LABEL OVER RUN
Label overruns.
Press the
key.
Message
Cause
Solution
PLU NOT FOUND
Corresponding PLU # is not
registered.
Press the
key, and enter the correct
PLU #.
PRT FAILURE DETECTED Printer trouble.
Same as in the label issue mode.
LABEL OVER RUN
Label overruns.
Press the
key.
C
C
C
ESC.
C
FEED
FEED
C
ESC.
C
FEED