Toshiba TEC SL-9000N-FFH-QR - Manual (Page 76)

13. OPERATING PROCEDURES
13.9 SELECTING PRINT ITEM
13-15
13.10 DATE CHANGE
The date can be changed temporarily.
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX, or BY COUNT
NOTES:
1. A store code can be printed in place of a ‘packed on date’ and ‘sell by date’ by changing the
initial settings #6-5 and #6-6.
To print a store code, select ‘packed on date’ or ‘sell by date’ as a print item using the above
procedure.
2. The print of “packed on time” with alphabetical code can be selected with the Initial setting
#6-6. (SL-9000N only)
3. Setting data will not be changed by turning the power off, changing the mode or calling a
PLU.
4. The key has no function.
5. Pressing the key allows you to return to the step of selecting the ‘packed on date’.
6. The range of idle time=0 to 99 seconds. A setting 0 prohibits display of an auto
message.
7. Item 29 is operable only when the initial setting #1-5 is set to ‘0’.
8. Be sure to press the
key after the key when changing the label format.
0
C
FEED PRT/*
Press:
1
2
NOTE: The scale will check the details of the date input. An invalid date will result in an
error.
1
8
9
4
Enter the new date.
(Ex. Dec. 18, 1994)
Day
Year
Month
DATE 1 2 1 8 9 4
PRT
*
DT/TM