Transition Networks P332MF - Manual (Page 28)

Prepare for Configuration
28 Quick Start for Hardware Installation: P332MF Stackable Switch
Tip:
Tip:
Functions operate in their default settings unless configured otherwise.
Table 7: Default Port Settings
Parameter Default Setting
Port speed and duplex mode ● 10/100-TX ports: Auto-negotiation
● 100Base-FXports:100 Mbps full duplex
● 1000Base-X ports: 1000 Mbps full duplex
Flow Control ● 10/100 and 100 Mbps: Disabled
● 1000 Mbps: Disabled (no pause)
Backpressure ● 10/100: Enabled (when in half duplex mode)
● 100Base-FX &1000 Mbps: Not applicable
Auto-negotiation ● 10/100-TX ports: Enabled
● 100Base-FX ports: Not applicable
● 1000Base-X ports: Enabled
Administration State Enabled
Port VLAN ID 1
Tagging mode Clear
Port priority Regular