Binatone TP-4050 - Manual (Page 6)

6
Do not use the lid to carry the thermopot; always use the special
handle for this purpose.
To avoid electrical current shocks, to not put the thermopot on
ice to cool the water in it.
Do not distort the power cable and do not place it near a
source of heat. Do not wind the power cable around the
appliance and do not put heavy objects on the cable.
Only use a dry cloth to remove dust from the power cable plug
or its contacts.
While disconnecting the appliance from the power grid, to do
not pull the power cable - grasp hold of the plug and pull!
Let the appliance completely cool down before cleaning or
storing.
Always disconnect the appliance from the power supply dur-
ing long-term storage, before filling the appliance with water
or emptying and before relocation of the appliance. While
transporting or storing the appliance make sure its empty of
water.
APPLIANCE PARTS
1. Casing (Fig. A)
2. Internal bulb
3. Removable lid (Fig. B)
4. Lid locking valve
5. Steam discharge port
6. Manual pump button
7. Lever for manual pump locking “Lock/Open”
8. Control panel (Fig. C)
Buttons:
“Boil” - boiling
“Dispense” - filling
“Unlock” - unlocking
Indicators:
“Boil” - boiling
“Keep warm” - warming
“Unlock” - unlocking
9. “Cup switch” valve
10. Water supply port
11. Handle
12. Rotating base
13. Water level scale
14.Power cable slot
15.Detachable power cable