Tricity Bendix BIW 123 W - Manual (Page 6)

1 Programme guide
2 MAINS-ON Light
This light illuminates when the machine starts working
and goes out when the ON/OFF button is released.
3 On/Off Button
By depressing this button the machine starts operating.
When depressed again, the machine stops.
4 HALF LOAD Button
Select this button to reduce water consumption on the
rinse cycle when washing a smaller load of cottons or
linens (maximum load size = 2.25 kg).
6
The Control Panel
1 2 3 5 4 6
1200rpm
on /off
BIW 123 W
PROGRAMME
1
mains on
rinse
hold
2 3
4
5
6
7
8
9
10
11
12
half
load
WHITES with prewash 95° 1
WHITES 95° 2
FAST COLOURS 60° 3
NON FAST COLOURS 40° 4
Rinse 5
Long Spin 6
SYNTHETICS 50° 7
Short spin 8
WOOL 40° 9
DELICATES 40° 10
Rinse 11
Drain 12
5 RINSE HOLD Button
Press this button to make the machine stop with water
in the drum after the cotton, synthetic or delicate wash
cycles.
This prevents any creasing which may occur if the
clothes are left damp in the drum. When it is
convenient for you to empty the machine, simply press
this button again so that the machine can proceed to
drain and spin, or select the drain programme “12”.
If this button is not activated, the washing programmes
will end with a spin.
6 Programme Selector Dial
Turn the dial clockwise to select the required wash
programme.
Before setting the dial to any position the machine must
be switched off by depressing the ON/OFF button
again.
132993051.qxd 11/18/02 9:29 AM Pagina 6 (Nero/Process Black pellicola)