Using the x-rite dtp32 densitometer, Setting up the dtp32 – Toshiba GA-1121 User Manual
Page 106
A
A-8
Color Measurement Instruments
Using the X-Rite DTP32 densitometer
ColorWise Pro Tools are designed to work with the X-Rite DTP32 reflection
densitometer, which feeds color measurements to the GA-1121 automatically.
N
OTE
:
Measurements from other densitometers can be input using a simple ASCII file
format (see
).
Setting up the DTP32
Before you calibrate the GA-1121 using the X-Rite DTP32, you need to connect,
configure, and calibrate the densitometer to prepare for measuring the printed patches
(see
on page A-10). For additional information about setting
up and using the DTP32, see the separate documentation included with the
densitometer.
T
O
CONNECT
THE
X-R
ITE
DTP32
TO
THE
COMPUTER
1.
Turn off the computer.
2.
Plug the square end of the interface cable (looks like a modular phone plug) into the
I/O port on the side of the X-Rite DTP32.
Square connector