TOA Electronics CPEI 25150 - Manual (Page 28)

Section 5: Configuring TCP/IP 25
8. Click Protocol on the Select Network Component Type window and click Add . The Select Network
Protocol window is displayed:
Figure 18: Select Network Protocol
9. Click Internet Protocol (TCP/IP) .
10. Click OK . The Local Area Connection number Properties window is re-displayed.
11. Be sure the box next to Internet Protocol (TCP/IP) is checked.
12. Click Properties . The Internet Protocol (TCP/IP) Properties window is displayed:
Figure 19: Internet Protocol (TCP/IP) Properties
13. Be sure Obtain IP address automatically and Obtain DNS server address automatically are selected.
14. Click OK to accept the TCP/IP settings.
15. Click Close to close the Local Area Connection number Properties window.
16. Click OK .
Note: You may have to use the scroll bar to locate the Internet Protocol (TCP/IP) setting.