Tripp Lite U218-000-R - Manual (Page 3)

Installation
1. Connect the PS/2 Mouse and PS/2 Keyboard to the appropriate
connectors on the adapter. The ports are marked with an icon to
identify the mouse port and the keyboard port.
2. Plug the adapter’s USB plug into the computer’s USB port, or
into a USB Hub connected to the computer.
3. Power On the computer.
4. Use the mouse and keyboard as you normally would.
Operation
Customize your keyboard language input as well as selecting your
computers’ operating system.
Hotkey Selection
The adapter provides the following Hotkey Selection features:
• Operating System Selection
• Language Input Selection
Operating System and Language Selection
Hotkey operations begin by pressing and holding the Right Control
key, then press and release the F12 key, then press and release n.
[Right Ctrl] +[ F12] + [n]
Where n represents the operating system and language, shown in the
tables below:
Operating System Hot Key Combination
Windows RCtrl+F12+W
Macintosh RCtrl+F12+M
SUN RCtrl+F12+S
K/B Language Hot Key Combination
English & Japanese RCtrl+F12+J
English & French RCtrl+F12+F
200303234 U218-000-R owners manual.qxd 4/8/2003 5:25 PM Page 4