Taylor 1506 - Manual (Page 9)

8
Setting the Time & Alarm (continued)
3. Clock & Calendar
Press “CLOCK” on the front of the unit to toggle between time,
calendar and day of the week displays.
The clock may be set to display in 12 or 24 hour format, and the
calendar may be set to display in Month/Day or Day/Month format.
This set up procedure will also allow manual setting of the time and
date:
Press and hold the “CLOCK” button on the front of the unit. The unit
will beep and the time display will show 12H or 24H. Press “p”or “q“
buttons to select data in the following sequence: 12/24 hour>hour
>minutes>year>Day/Month or Month/Day>month>date. After each
selection press the “CLOCK” button to enter. Press the “CLOCK”
button after the last entry to return to the time display.
4. MOON PHASE
The Moon phase will automatically display according to current calendar.
5. ALARM SETTING
Press and hold "ALARM" on the front of the unit. The alarm time and
an “AL “ icon will appear in the clock display. The hour digits will
flash. Press “p”or “q“ buttons to change the alarm hour and then
press "ALARM" to confirm the hour. The minutes digits will flash. Press
“p”or “q“ buttons to change the alarm minutes and then press
“ALARM” to confirm the minutes.
The LCD will return to the clock display and the bell icon ( ) will
indicate that the alarm is enabled.
To disable the alarm, “ALARM” button until the bell icon disappears.
Press “CLOCK” to return to the clock display.
6. SNOOZE / LIGHT
When alarm sounds, press “SNOOZE / LIGHT” on the front of the
unit to trigger the snooze alarm. A “Zz” icon will appear above the
time display. To stop the alarm for one day, press “ALARM” button. To
disable the alarm, “ALARM” button until the bell icon disappears.
Press “CLOCK” to return to the clock display. Press “SNOOZE /
LIGHT” for an extended backlight when the adapter is not connected.