Tekxon Technology V5300 - Manual (Page 33)

33
‚ If the video camera is not in use for a long period, the battery should be
removed.
‚ If AC adapter is overheated during its use, it should not be used any longer.
‚ Avoid shock or impact on the battery or AC adapter
‚ Avoid unexpected accidents, the battery and AC adapter should be placed out
of children’s reach,
‚ Aged batteries should be recycled according to related regulations of the State
to protect environment.
7.4 Troubleshooting
Symptoms Possible Causes Solutions
No response
when power
button is pressed. z The battery has low
voltage.
z The AC adapter
does not supply the
voltage normally.
z Replace it with a new
one.
z
Check if AC adapter
and supply socket are
normal.
The video camera
suddenly stops
during operation
after operating for
some time. z The battery has low
voltage.
z No battery is inside
the video camera or
AC adapter is
powered off.
z Replace or recharge the
battery
z Check if AC adapter
works normally.
The video camera
suddenly stops
during operation
after having not
operated for some
time. z It has been in
standby state for a
long period and
automatically
switches off.
z Restart the video
camera.
z Disable automatic
switch- off.
The battery is
used up very
soon z It is not fully
recharged
z
It is aged.
z Correctly recharge the
battery to full capacity
z Replace it
The video camera
gives an error
message after SD
card is inserted. z The card is not
formatted
z Bad contact
z Format it
z Clean card contact and
reinsert it.