T+A Elektroakustik 1235 R User Manual

Page 7

Advertising
background image

7

(only P-Scan option)

A long key press (approx. 3 sec.) switches the progressive
scan mode for the YUV component video output on and off.
Progressive scan increases the picture quality dramatically
but it requires a progressive scan capable projector or TV
set.

IMPORTANT Note:

Before switching to progressive scan mode, please make
sure that your video monitor or TV set is capable of
displaying progressive video signals! Please consult the
manual of your video monitor or ask the manufacturer.

If the monitor is not capable of displaying progressive video
signals, a distorted or no picture at all will be displayed. In
this case please immediately switch back to normal video
mode.

Note:

The DVD 1235 R can be optionaly equipped with a state-
of-the-art Faroudja ™ video processor with DCDi ®
technology.
To optimize the picture quality some video parameters
can be adjusted in the menu 'Preferences/Adv. Picture'
. Please refer to the chapter OSD MENU

Adjustment of the display brightness
By repeatedly pressing the

-button the brightness

of the alpha-numercal display can be adjusted in 3 steps:

1. Normal setting:

good legibility, even in bright conditions and sunlight.

2. Subdued:

Subdued setting, for dark locations.

3. Display off:

the screen is switched off completely. The screen
lights up for a few seconds whenever a command is
sent to the unit, so that you can see the new setting.

Selection of the REPEAT-mode.
(see chapter 'Operation of the DVD 1235 R').

A short keypress opens the disc menu of a video DVD.
(see chapter 'Menu-Functions').

A long keypress (approx. 3 sec.) opens the SETUP
Menu of the DVD 1235 R.

Cursor block

(multi function buttons)

 

 

These multi-function buttons are used for navigation
within On-Screen-Menus and for play back control (track
jump, cueing etc.)

Menu-

Navigation

Play Back Control


selection

buttons

These buttons are used to
jump to the next / previous
track, chapter or title.

For MP3 music discs these
buttons select a title within
the current directory.


adjustment

buttons

Fast Forward / Reverse
The fast mode is ended by
pressing the

 button.

For MP3 music discs these
buttons select the active
directory on the disc.

confirm button

A short keypress will start
the playback or will resume
playback after a pause.

A long keypress will switch
to CURSOR-Mode (NAVI-
GATION

Mode)

(see

chapter 'Manual Cursor-
control').

Advertising