Heading2 - troubleshooting, Troubleshooting – Toshiba TDP-B1 User Manual
Page 36
29
Troubleshooting
Problem: Nothing on projection screen
•
Make sure that the power cord is properly connected to a fully func-
tional AC electrical outlet. Make sure that the power cord is also
properly connected to the projector.
•
If the projector is plugged into a power strip, make sure the power
strip is turned on.
•
Make sure you have removed the lens cap on the projection lens at
the front of the projector.
•
Make sure the lamp is switched on.
•
Make sure that the cables do not have any bent pins.
Problem: Color or text not being projected
•
You might need to adjust the brightness up or down until the text is
visible. Refer to “Brightness” on page 19 for more information.
Problem: The screen resolution is not right
•
Make sure the computer’s video card is set for a resolution of no
greater than 1024x768.
Problem: Image isn’t centered on the screen
•
Move the projector to reposition the image.
•
Reposition the image using the software. Refer to “Horizontal posi-
tion” on page 22 and “Vertical position” on page 22.
•
Be sure the projector is at a 90 degree angle to the screen.
Problem: Only the start-up screen displays
•
Verify that the cables are connected correctly. See page 7 through
page 8 for connection procedures.
•
Verify that the proper input source is connected. See “Source (keypad