Tripp Lite SR25UB - Manual (Page 2)

Tool-less accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable
managers. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can
accommodate two vertical PDUs or cable managers side-by-side (four items per enclosure)
Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws
Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses
Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements
Maximum usable internal depth of 37 inches/94 cm (front to rear rail)
Weight ratings of 3000 lb stationary and 2250 lb rolling
Front door is locking, reversible and removable
Rear doors are locking and reversible. Split rear door design reduces clearance requirements for service entry allowing the enclosure to be
placed closer to a wall
Locking removable side panels are 'half size' to make them smaller and lighter improving ease of installation and servicing. Side panels are
keyed alike to the front and rear doors
Built in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set at 600mm or 24" to match standard
data center floor tiles
Leveling feet extend to allow enclosure to be positioned on uneven floors. Levelers are removable
Convenient grounding system. All components are grounded to the enclosure frame which includes multiple connections for facility ground.
Front and rear doors include quick-release ground wires
Open bottom for cable access
Top panel has generous cable access holes. Panel can be removed without the use of tools in seconds without having to disconnect cables
first
Included stabilizing brackets are used for shipment and can be reattached at the bottom of the enclosure frame on the inside or outside of
the rack
Compatibility with airflow optimization accessories as well as cable management accessories
Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) compliance
Specifications
PHYSICAL
Installed whole system
maximum rack depth (inches) 37
Installed whole system
maximum rack depth (cm) 94.0
Installed whole system
minimum rack depth (inches) 4
Installed whole system
minimum rack depth (cm) 10.16
Rack Height 25U
Shipping Dimensions
(HWD/in) 55 x 27.75 x 47
Shipping Dimensions
(HWD/cm) 139.7 x 70.48 x 119.38
Shipping weight (lbs) 237
Shipping weight (kg) 106.65
Unit Dimensions (HWD/in) EXTERNAL DIMENSIONS: 49 x 23.63 x 43
Unit Dimensions (HWD/cm) 124.46 x 60.02 x 109.22
Unit weight (lbs) 195
Unit weight (kg) 88
Color Black