Toshiba XM-6802B - Manual (Page 14)

12
DRIVE CONNECTORS –XM-6802B
Figure 1.XM-6802B CD-ROM Drive Rear Panel - Connectors
Power
Connector Power is supplied to your CD-ROM drive by the connection with your computer's
+5V/+12V power cable to the power socket at the back of drive. One side of the plug
has chamfered edges, so the power connector fits only one way
CAUTION: Severe damage to the Drive circuits may occur if power cable is plugged in
upside-down with power ON.
Audio
Connectors
Supplies Analog sound to your system
ATAPI
Connector The XM-6802B CD-ROM drive is connected to your computer system through the ATAPI
connector.