Thales Navigation 200 - Manual (Page 67)

Preferences 62
6. Region. Use the Arrow joystick to highlight the region of the
world for your present location.
You can also enter the coordinates for your present position
if you know them by highlighting
Enter Coord. This is rarely
used and is not described in this manual.
7. Press ENTER.
8. Area. Use the Arrow joystick to highlight the area of your
location. The list of areas is different for each region
selected in step 6.
9. Press ENTER.
10. Time. Use the Arrow joystick to enter the current time. Push the Arrow joystick up
or down to change the value and left or right to move the cursor.
Note: Time is one of the first pieces of information transmitted by the satellites
and even without enough satellite information to compute a position fix, the time
displayed may have already been corrected.
11. Press ENTER.
12. Date. Use the Arrow joystick to enter the present date. Push the Arrow joystick up
or down to change the value and left or right to move the cursor.
Note: Date is also sent by the satellites and may already be correct as well.
13. Press ENTER.
14. Use the Arrow joystick to highlight
Done.
15. Press ENTER.
16. The last viewed navigation screen is displayed and the
eXplorist will begin tracking satellites.
Region
Enter Coord
USA
Americas
Europe
Asia East
Asia West
Area
Alabama
Alaska
Arizona
Arkansas
California
Colorado
Date
37° 00.000N
Done
119° 00.000W
0 F
T
10:16AM
21 MAY 04