Toshiba WLT68 - Manual (Page 33)

AV connection
PC/HDMI1 audio PC
HDMI1 audio Digital
EXT1 output DTV
EXT2 input AV
EXT2 output DTV
Woofer Internal
MENU Back EXIT Watch TV
AV connection
PC/HDMI1 audio HDMI1
HDMI1 audio Auto.
EXT1 output DTV
EXT2 input AV
EXT2 output DTV
Woofer Internal
MENU Back EXIT Watch TV
1/2 SET UP
Language English
Country UK
Auto tuning OK
Manual tuning OK
Antenna Amplifier On
AV connection OK
MENU Back EXIT Watch TV
33
Input selection and
AV connections
continued
In the SET UP menu press Q until
AV connection
is highlighted, then press OK.
1
2
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
HDMI1 audio
If the connected HDMI source does not support digital
audio, plug the audio cable into PC/HDMI1 audio on the
back of the television (as shown in the ‘Connecting a
computer’ section), then use the HDMI1 audio settings.
In the AV connection menu press Q to highlight
PC/HDMI1 audio
and using
R select HDMI1.
Then highlight HDMI1 audio and using
S or R
select Auto., Digital or Analogue.
If the sound is missing select an alternative
setting.
NOTE: HDMI1 supports digital and analogue
sound, HDMI2 and HDMI3 are digital sound only.
Certain formats of DVD disk may not output from
this TV (32/44.1/48kHz and 16/20/24 bits are
acceptable).
If using PC HDMI to TV HDMI XGA and SXGA
cannot be displayed.
2
Highlight PC/HDMI1 audio then use to Rselect
the PC option.
NOTE: Selecting the PC option will force HDMI
into digital audio.
In order to receive sound from a connected PC, plug the
audio cable into the back of the television (as shown in
‘Connecting a computer’ section), then use the
PC/HDMI1 audio settings.
PC audio
1
g p g