Tripp Lite BP36V142U - Manual (Page 3)

3
Installation
Color Selection
(BP48V242U Only)
The BP48242U can be configured to match black or grey equipment. To match black equipment,
switch the grey front panel on the unit for the black front panel included.
Single Unit Installation
Connect the shelves to the shelf extensions (A) using
the included hardware (B). Leave the screws slightly
loose so that the shelves can be adjusted in the next step.
Adjust each shelf to fit your rack, then mount them in
the lowest available space of your rack with the hard-
ware provided (C). Note that the support ledges should
face inward. Tighten the screws that connect the shelf
segments (B).
Attach mounting ears (D) to the front mounting holes
of your equipment (E) using the screws provided (F).
The ears should face forward.
Using an assistant if necessary, lift your equipment
and slide it onto the mounting shelves. Attach your
equipment to the rack by passing user-supplied hardware
(G) through its mounting ears and into the rack rails.
1
2
3
A
B
1
C
B
2
E
D
F
3
G
4
4
200209091 93-2093 Rackmount Battery Pack Owner’s Manual.qxd 9/23/2002 2:22 PM Page 3