Toshiba TDP-MT200 - Manual (Page 26)

26
Using handy features (Continued)
● Manual adjustments and settings
The menu items of the Set up menu vary depending on the input type, as shown in
the table below.
Use the
buttons to adjust the items in the table below, then press
the RETURN button when you are finished.
Select Item Description Computer DVI Y/P B /P R
Video
S-video
Keystone Correct the keystone (trapezoid) distortion of the
screen.
Screen shrinking Screen shrinking
downward upward
Auto setting Automatically adjusts items such as the sampling
phase depending on the type of input signal.
Press the SET UP button.
Phase Adjust with to eliminate flicker.
Frequency Adjust with to eliminate periodic patterns
and flickering when many vertical lines appear
on the screen.
Image’s Adjust the horizontal position of the image.
H-position Move left Move right
Image’s Adjust the vertical position of the image.
V-position Move down Move up
Clamp 1 Adjusts the clamp pulse position.
Lower Higher
Clamp 2 Adjusts the clamp pulse width.
Narrower Wider
Yes Yes Yes Yes
Yes No No No
Yes No No No
Yes No No No
Yes No No No
Yes No No No
Yes No No No
Yes No No No