TELUS I465 - Manual (Page 74)

70 Mike’s Talk Around TM
hold the PTT button. Transmit appears on
the first line of display. Begin speaking
after your phone emits the Mike’s Talk
Around tone.
Note: The Mike’s Talk Around tone consists of
4 rapid beeps.
2 Release the PTT button to listen.
If you receive an error message:
• No one is on your channel or code.
• You are out of range.
receiving code calls
When you receive a code call, Receive will
appear on the display. After hearing the Mike’s
Talk Around tone, you have 6 seconds to reply
before the call times out.
To reply to the call, press the PTT button.
Note: An incoming Mike’s Talk Around call
can be terminated at any time by pressing
..
receiving all Mike’s Talk Around
calls
If you set the code to Receive All, your phone
can receive Mike’s Talk Around transmissions
from any phone that is set to the same
channel, regardless of the code (1-15). When
you receive transmissions with the code set
to Receive All, the code that the transmission
was received on will replace Receive All on the
display.
Note: You cannot initiate a code call when the
code is set to Receive All.
To set the code to Receive All:
1 From the Mike’s Talk Around idle screen,
press
K under Edit.
2 Scroll to Code.