Installation, Warranty registration – Tripp Lite Inverter Power Cable Kit User Manual
Page 2
200706248 93-2700
Installation
1
Fuse Holder
•
Use the supplied hardware to mount the fuse holder securely. Mount within 12 inches (304.8 mm) of the battery.
2
Fuse
•
Remove the nuts (total of 2) from the fuse holder studs and install the supplied fuse.
•
Note: For PV1800HF use 250A fuse; for PV3000HF use 500A fuse.
3
Longer Positive Cable
•
Install the cable lug onto the fuse holder stud, reinstall the nut and tighten to 10.0 ft-lb (13.5 N˙m).
•
Route the cable to the inverter, cut to length, strip the end, attach it to the inverter’s POSITIVE (+) connection and
tighten to 2.58 ft-lb (3.5 N˙m).
4
Shorter Positive Cable (Note: The cable has two different size battery lugs.)
•
Install the cable lug with the smaller hole onto the other fuse holder stud, reinstall the remaining nut and tighten to
10.0 ft-lb (13.5 N˙m). Close the fuse holder cover.
•
Install the cable lug with the larger hole onto the battery’s POSITIVE (+) connection and tighten securely.
5
Negative Cable
• Position the negative battery cable near the negative battery post, but DO NOT install at this time.
•
Route the cable to the inverter, cut to length, strip the end, attach it to the inverter’s NEGATIVE (-) connection and
tighten to 2.58 ft-lb (3.5 N˙m).
•
Install the negative cable lug onto the battery’s NEGATIVE (-) connection and tighten securely.
6
Inverter Ground Connection
•
Install the supplied ground lug to provide a chassis ground.
•
Route the 8 AWG (3.264 mm) ground wire from the inverter’s main ground lug to the chassis ground lug.
•
Provide a strain relief loop in the ground wire.
Warranty Registration
Warranty Registration
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be entered into a
drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See Web site for details.
Tripp Lite has a policy of continuous improvement. Product specifi cations are subject to change without notice.
_
+
1
2
3
6
5
4
_
+
200706248 Owners Manual 93-2700.2 2
200706248 Owners Manual 93-2700.2 2
7/17/2007 2:17:25 PM
7/17/2007 2:17:25 PM