Toshiba M10 User Manual
Page 270
4 Replacement Procedures
4.18 RTC Battery
4-58
Satellite Pro M10 Series Maintenance Manual (960-431)
Removing the RTC Battery
To remove the RTC battery, follow the steps below and refer to Figure 4-38.
1. Remove two strips of tape securing the RTC battery cable.
2. Disconnect the RTC battery cable from PJ9999 on the system board.
3. Remove one strip of tape securing the RTC battery.
4. Lift out the RTC battery.
RTC battery
RTC battery cable
PJ9999
Tapes
Figure 4-38 Removing the RTC battery
Installing the RTC Battery
To install the RTC battery, follow the steps below and refer to Figure 4-38.
1. Seat the RTC battery.
2. Secure the RTC battery with one strip of tape.
3. Connect the RTC battery cable to PJ9999 on the system board.
4. Secure the RTC battery cable with two strips of tape.