Tyco 1928L - Manual (Page 21)

STEP 2-Connecting the Serial and USB Touchscreen Cable
• Connect the female end of the serial (RS-232) cable to the serial port on your PC, or
connect the USB( ) touchscreen cable to the USB( ) touchscreen connector on the back
of your touchmonitor.
• Connect the male end of the cable to the serial touchscreen connector on your
touchmonitor, or connect the other end of the USB( ) touchscreen cable to your PC.
• Secure the cable to your touchmonitor and PC by turning the screws on the connector.
• Please note that you can only have the usb or the serial feature connected. You can not
have both connected at the same time.
SERIAL TOUCHSCREEN CABLE
FEMALE 9-PIN SERIAL
TOUCHSCREEN CONNECTOR
CONNECTORS ON THE UNDERSIDE
USB CONNECTOR
2-7