Toshiba SD-V291 - Manual (Page 37)

37
Recording (VCR)
Timer recording
Timer recording can be programmed on-screen with the remote control. The
built-in timer allows automatic unattended recording of up to 8 programs
within 1 month.
Timer recording
Notes:
• Press CANCEL to move cursor backward for correction.
• To record from external source set the channel to “L1” or
“L2”.
Notes:
• If the timer symbol (
) blinks when the timer recording ended,
the TV program has not been completely recorded because of
an insufficient tape length. Press TIMER REC to cancel the
timer program or press EJECT to remove the cassette tape.
• During timer recording standby mode, the VCR mode cannot be
operated. To use the VCR, press TIMER REC at first, then press
VCR DVD selector to change to VCR mode. After you use the
VCR, press TIMER REC again to put the VCR into timer
recording standby mode.
• If you press TIMER REC during timer recording, the recording
operation will be interrupted. If you press TIMER REC again
within the programmed time, the recording operation will start
again.
• After a power failure or disconnection of the power plug, all
programmed recording settings and time display will be lost
upon resumption of power. In this case, reset the clock
24 and
reprogram any timer recording.
Press VCR MENU. Select “TIMER REC SET”,
then press ENTER.
Preparation:
• Press VCR DVD selector to select the VCR mode.
• Load a cassette tape with the erase prevention tab
intact.
• Check the time and date are correct 24 .
Example: Program a timer recording for the 26th day,
channel 125 (CATV), 11:00 - 11:30 PM on timer program
number 1 (Tape speed: SLP).
1
Press SET + or – to select one of the program
line, then press ENTER. 2
Press SET + or – to select the date, then press
ENTER. 3
Set the start time, end time, channel and tape
speed as in step 3. 4
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF SAP
CH SETUP
SYSTEM SETUP
á+/-/ENTER/MENU с б+/-/ENTER/MENU с
б+/Р/ENTER/CANCEL/MENU ñ
DATE START END CH
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р
Р
Р
Р
Р
Р
Р
26(SU) 11:00 PM 11:30 PM 125 SLP
б+/Р/ENTER/CANCEL/MENU ñ
DATE START END CH
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р
Р
Р
Р
Р
Р
Р
26(SU) 11:00 PM 11:30 PM 125 SLP
To enter other programs, repeat step 2
through 4.
• To return to the normal screen,
press VCR MENU twice.
5
Press TIMER REC. The timer symbol ( ) will
appear on the display and the VCR stands by
for recording.
At the same time, VCR mode will
change to DVD mode automatically.
You can use DVD even if the VCR is
in the timer recording mode.
If you do not use the DVD, turn the
power off.
6
Notes:
• The timer recording will start at 5 seconds before the time
you predetermined.
• If the timer symbol( ) does not appear on the display in
spite of the pressing of TIMER REC, the cassette may not
have been loaded.
29
• If the cassette is ejected in spite of the pressing of TIMER
REC, the erase prevention tab of the cassette may have
been removed.
29
2,3
1–3
VCR DVD
TIMER REC
CANCEL
1,5
EJECT
á +/–/ENTER/CANCEL/MENU ñ
DATE START END CH
– – – – – – – : – – – : – – – – –
– – – – – – – : – – – : – – – – –
– – – – – – – : – – – : – – – – –
– – – – – – – : – – – : – – – – –
– – – – – – – : – – – : – – – – –
– – – – – – – : – – – : – – – – –
– – – – – – – : – – – : – – – – –
– – – – – – – : – – – : – – – – –
–
–
–
–
–
–
–
–
б+/Р/ENTER/CANCEL/MENUñ
DATE START END CH
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р
Р
Р
Р
Р
Р
Р
Р
26(SU)
SET +
SET –
CH – CH +
ENTER
VCR MENU
SETUP
SET +
SET –
CH – CH +
ENTER
SET +
SET –
CH – CH +
ENTER
VCR MENU
SETUP
TIMER REC
2C51501C (E)p34-37 7/10/03, 10:43 AM 37