Playback, Loading/unloading a video cassette, Loading and unloading a video cassette – Toshiba Television/Vcr Combination MV13N3 User Manual

Page 35

Advertising
background image

33

EJECT

Push the center of the tape until it is automatically retracted into the TV/VCR.

AUTOMATIC POWER ON AND PLAY
When loading a cassette tape without the erase prevention tab intact, the TV/VCR will turn on automatically
and playback will start immediately.

Insert the cassette with its labeled side facing you.
An inverted video cassette cannot be inserted.

LOADING AND UNLOADING A VIDEO CASSETTE

UNLOADING

Pull the cassette out.

1

LOADING

AUTOMATIC EJECT
If the TV/VCR automatically rewinds the tape to the
beginning (AUTO REWIND FEATURE), the tape will
be ejected automatically (See NOTE on page 40).

NOTES:

Always eject the tape when not in use.

The cassette tape can be ejected even if the POWER is “OFF”.

OR

2

To unload a video cassette, press the EJECT
button on the remote control, or press the
STOP/EJECT button on the TV/VCR twice.

The first press will stop the tape in any mode. The
second press will eject the tape.

Use only video cassette tapes marked

.

2

1

STOP/EJECT

5E20201A P20-33

12/11/2002, 10:29

33

Advertising