Toshiba SD-R5272 - Manual (Page 18)

16
DRIVE CONNECTORS –SD-R5272
Figure 1.SD-R5272 DVD Rewriteable Drive Rear Panel - Connectors
Power
Connector Power is supplied to your DVD drive by the connection with your computer's
+5V/+12V power cable to the power socket at the back of drive. One side of the
plug has chamfered edges, so the power connector fits only one way
CAUTION: Severe damage to the Drive circuits may occur if power cable is plugged in
upside-down with power ON.
Audio
Connectors Supplies Analog and Digital sound to your system
ATAPI
Connector The SD-R5272 DVD drive is connected to your computer system through the
ATAPI connector.
Mode Select
Jumper The mode select jumpers are 6 straight angle pins located on the rear of the DVD
drive.
By placing a jumper on the pins, you can select the following functions: CL (CSEL),
SL (Slave) or MA (Master). (see Setup for additional information).