Transcend Information TS8XDVDRW User Manual
Page 6
4
•
Only use the USB cable that came with the CD/DVD Writer to connect it to a computer,
and always ensure that the cable is in good condition. NEVER use a cable that is frayed
or damaged.
•
Ensure nothing is resting on the USB cable and that the cable is not located where it can
be tripped over or stepped on.
•
If you have connected all ends of the USB cable and still have power-related problems
while reading / writing data, we recommend that you purchase a Transcend USB Power
Adapter (TS-PA2A) to provide the power necessary to operate the CD/DVD Writer.
Reminders
Always follow the procedures in the “Disconnecting from a Computer” section to remove the
CD/DVD Writer from your computer.
The second USB connector provides additional power for the
CD/DVD Writer. Please make sure to connect both USB
connectors to your computer’s USB ports.