Operating instructions – Troy-Bilt TBBV User Manual

Page 9

Advertising
background image

OPERATING INSTRUCTIONS

9

Fig. 8

Fig. 9

Fig. 10

OPERATING TIPS

NOTE: Move the unit slowly back and forth over debris

to be vacuumed or blown.

NOTE: Vacuum a large pile of debris by working from the

outside of the pile. Do not force the suction tube
into the debris because this can clog the unit.

OPERATING VACUUM

1. The vacuum can be used for cleaning around rocks,

under shrubs and trees, along walls, or vacuuming
piles of debris formed by blower (Fig. 8).

2. Disconnect unit from power source before removing

bag. Once removed, shake the bag vigorously while
emptying to completely remove the contents (Fig. 9).

OPERATING BLOWER

1. You can blow debris from around buildings, trees,

shrubs, and flower beds, or into a pile to be
vacuumed (Fig. 10).

OPERATING TIPS

• Be sure the vacuum bag is zipped closed before

operating the unit.

• Assure the unit is not directed at loose debris or

persons before starting unit.

• The unit is in good working condition. The tubes and

guards are in place and secure.

• Always hold the unit with both hands when

operating. Keep a firm grip on both the front and rear
handle or grips.

• To reduce the risk of hearing loss associated with

sound level(s), the use of hearing protection is
required.

• Watch out for children, pets, open windows, or freshly

washed cars, and blow debris away.

• After using blowers and other equipment, CLEAN UP!

Dispose of debris in trash receptacles.

Advertising