TC Electronic G-Force - Manual (Page 20)

18
Store a new User preset
- Press the Store key.
- Select a location for your new preset. (the G-Force can hold 100 User presets).
- Move the cursor to the new name line and dial in the new Preset name (find letter or number with the Value wheel and
confirm with the Enter key).
- Set Cursor to DONE and press Enter to complete the store operation.
Quick Store with the same name
If you want to store an edited Factory preset with the same name, simply press Store and Enter. The G-Force will
automatically store the preset in the first empty User space.
If you want to store an edited User preset with the same name, simply press Store and Enter. The G-Force will suggest the
same User preset position as the storing space.
STORE
The Letterbox
When you want to change the name of the preset to Store,
dial the Parameter wheel. You are now able to write a new
name using the Letterbox. Simply dial the Value wheel and
press Enter to select new letters or numbers.
Select CAP, by pressing Enter, to change the letter case.
When you have changed the name, select DONE in the
Letterbox and press Enter to Store.
Press any key to leave the Store display.
Using a Memory Card
When inserting a memory card you gain access to the card
banks. The card banks are located immedeately after the
User bank.
Depending on the size of the card you can store up 9
banks of 100 user presets.
Card types
S-RAM Type 1 PCMCIA cards, with a minimum of
64Kbytes, and a maximum of 2Mbytes S-RAM.
Delete
Use the < > Arrow keys to select Delete. Dial the Value
wheel to select the preset you want deleted, and press
Enter to delete.
Bank Indicator
Store location
CAPS lock
indicator
New preset name
Letterbox
Place cursor here, and
press Enter to complete
Store operation