Toshiba IK-TF9C - Manual (Page 6)

6
3. NAMES AND FUNCTIONS
1 Prism faceplate The protection cap is attached on the lens mount portion. After removing the cap,
mount the lens. Be careful not to scratch or touch the optical area.
2 DISP button Used when switching the display.
3 PAGE button Used when switching to the menu and when selecting the menus.
4 MENU UP button Select the function to be confirmed or changed on the menu.
5 MENU DOWN button Select the function to be confirmed or changed on the menu.
6 DATA UP (AWB) button Changes the value of the function selected by the MENU (UP/DOWN) button. (Also
used when using AWB.)
7 DATA DOWN button Changes the value of the function selected by the MENU (UP/DOWN) button.
8 DC IN 12V terminal Accept a DC power input (12V).
9 RGB terminal 8-bit RGB, digital signal, and sync signal are output in the Camera Link format.
Trigger signal is input.
Mode switching signal for partial scanning is input.
Accepts serial communication control signal.
! Mounting holes M3 Used to fix the camera.
" Mounting holes M2 Used to fix the camera.
# Mounting holes M3 Used to fix the camera.
DISP
PAGE
DC IN 12V
MENU DATA
(AWB)
1 8
2
4
6
7
5
9 3
Prism faceplate
DIGITAL terminal
DISP button
PAGE button
[ Rear ] [ Front ]
MENU UP button
MENU DOWN button
DATA UP (AWB) button
DATA DOWN button
DC IN 12V terminal
12 10 11
[ Bottom ] [ Top ]