Turbosound TCS SERIES TCS-152/XX(DP) - Manual (Page 4)

Quick Start Guide
TCS series
TCS Quickstart Guide - Page - 4
Mounting and Fixing
TCS series cabinets are designed with multiple internal rigging points to suit many possible mounting methods in
permanent installations. All cabinets can be simply suspended using optional M8 or M10 shoulder eyebolts coupled to
the internal rigging points provided. Remove the appropriate countersunk screws and replace them with eyebolts,
which must have a thread length of at least 18mm. Use the rear rigging point to angle the cabinet for optimum room
coverage. Cabinets may be hung upside down if required. Turbosound WB-20, WB-55 and CB-55 wall and ceiling
brackets are optionally available for TCS series cabinets, and these are also compatible with OmniMount™ wall and
ceiling brackets which use 60mm x 60mm hole spacing. Some examples of rigging options are shown below.
Model Wall Ceiling Downfill Vertical
Array Horizontal
Array Eyebolts
TCS-61 WB-20 CB-55 SB-61
ICC-61 EB-8
TCS-122 WB-55 CB-55 ICC-2V FP-1
ICC-2H EB-10/40
TCS-152 WB-55 CB-55 ICC-2V FP-1
ICC-2H EB-10/40
TCS-1561 ICC-2V EB-10/40
TCS-B15A FP-2
ICC-4H
EB-10/40
TCS-B15B FP-2
ICC-4H
EB-10/40
TCS-B218 EB-10/40