Cocoon 300 – Topcom COCOON 300 User Manual

Page 68

Advertising
background image

69

• Press the Programming key

.

• Press the Up or Down key

repeatedly until ‘BARRING’ appears on the display.

• Press the Programming key

.

• ‘PIN’ appears on the display.
• Enter your PIN code
• Press the Programming key

.

• ‘BAR NUM ’ appears on the display. You are in memory “1. _ _ _ _ _”.
• Press the Up or Down key

to select one of the 5 memories.

• Enter the number (max. 5 digits) to be barred, e.g. 01486.
• Press the Programming key

.

• ‘HS _ _ _ _ _’ (= number on the handset (1-5)) ‘01486’ (= the barred numbers) appear on

the display.

• Enter the numbers of the handsets from which the barred numbers cannot be called.
• e.g. Press the number key 2, 3 and 5. On the display, this will appear: HS _2 3_5 01486

These handsets can no longer dial numbers beginning with ‘01486’.

• Press the Programming key

to confirm your selection.

Repeat the same procedure described above if you would like to bar other numbers (max. 5)!

4.29 Default settings (reset) of the parameters

You can reset the standard (default) settings in the telephone so that they are the same they
were when you bought the telephone. You need the PIN code to do this.

The default settings are:
Keypad:

not locked

Key clicks:

active

Speaker volume:

level 3

Ringer melody:

1

Ringer volume :

5

Selection base unit:

automatic

To restore the default settings, do the following:
• Press the Programming key

.

• Press the Up or Down key

repeatedly until ‘SETTING’ appears on the display.

• Press the Programming key

.

• Press the Up or Down key

repeatedly until ‘RESET’ appears on the display.

• Press the Programming key

.

• ‘PIN’ appears on the display.
• Enter your PIN code.
• Press the Programming key

.

4.30 Complete Reinitialisation of the telephone

This function allows you to completely reinitialise the telephone without requiring your PIN
code. This will delete all Phone Book memory entries, all handsets will be removed, all default
settings will be restored and the default PIN code will be restored to ‘0000’.

Cocoon 300

69

69

69

69

69

69

COCOON 300 27/6/01 2:45 pm Page 69

Advertising