Trango Broadband M900S - Manual (Page 52)

Trango Broadband Wireless — User Manual M900S Rev. C Page 48
Auto-Negotiation: Fully supports IEEE802.3-2002 Sect. 2 Clause 28
Bridging Frame Size: 60 to 1600 bytes
Mngmt Frames: 60 to 1472 bytes (includes PING, TELNET, TFTP, HTTP)
Protection:
Bi-directional transient voltage protection diodes on all data lines
compliance with:
IEC61000-4-2 (ESD)
IEC61000-4-4 (EFT)
IEC61000-4-5 (Lightning)
Power Specifications
Input Voltage:
Input voltage range at unit is 10.5 VDC to 24 VDC max
Power is supplied via the unused pins of the RJ-45 Jack. Power is injected into the Ethernet cable using a junction box
(provided).
Current Cons.:
400 mA in transmit and receive modes at max power using 24 V
standard adapter (8 W) and 10 ft cable from J-BOX to unit
Protection: 28 volt Transient Voltage Suppression (TVS) on power input
Note: Voltages above 28 volts will cause damage to unit.
Mechanical and Environmental Specifications
General
Material:
High Temp Polycarbonate radome and diecast metal enclosure
Size: 12.5” x 8” x 2.75” including mounting studs
Weight: 4 lb
Mounting: 2 U-Brackets, all-thread rod, nuts and washers
Connectors/Indicators
RF
Output: Integral internal patch antenna per Part 15C, 15.203
External RP-SMA-f connector for external antenna
FCC Compliance:
The transceiver shall comply with the following:
FCC Part 15.407
FCC Part 15.207(a)
Operating Temp:
-40º to 60º C
Storage: -40º to 85º C
Humidity: 100 % (When sealed properly.)
NEMA Rating: NEMA 4
Shock: Sustain 3 axis drop from 5 feet
Standard External Power Supply
24 Volt DC Power adapter and J-Box supplied with product.
Type:
Linear wallmount transformer
Input: 120 VAC
Output: 24 VDC +/- 1 V
Max current: 1000 mA
Connector: 5mm DC Barrel-type Plug
Standard External Power-over-Ethernet Junction Box
Type:
In-line female-to-female RJ-45 adapter for CAT-5 Ethernet cable
Connectors:
Eth. In: Shielded RJ-45 Jack
DC Input: 5mm DC Barrel-type Jack