Rear panel, 10 remote control operation range, Remote control battery installation – Toshiba SD-V65HTSU User Manual

Page 10

Advertising
background image

Rear Panel

6

6

6

6

6

Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.

VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right))

Connect the audio/video output of an external

source (Audio system, TV/Monitor, Another VCR).

ANT.IN
Connect the VHF/UHF/CATV
antenna to this terminal.

DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV with video and audio inputs.

AC Power Cord
Plug into the power source.

S-VIDEO OUT (DVD OUT)

Connect to a S-Video Input on TV. FOR DVD VIEWING ONLY.

DIGITAL AUDIO IN (OPTICAL)

Connect to a digital audio output on a digital device.

COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs. FOR DVD
VIEWING ONLY.

RF.OUT (DVD/VCR OUT)

Connect to a TV with RF coaxial inputs.

AM Antenna Connectors

Connect the AM antenna to this terminal.

FM Antenna Connectors

Connect the FM antenna to this terminal.

SPEAKER Connectors

Connect the six supplied speakers to these terminals.

10

Remote Control Operation Range

Point the remote control at the remote sensor and press
the buttons.

Distance: About 7m (23ft) from the front of the
remote sensor
Angle: About 30° in each direction of the front of the
remote sensor

Remote control battery installation

Detach the battery cover on the rear of
the remote control, and insert two R03
(size AAA) batteries with

and

aligned correctly.

Caution

Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).

AAA

AAA

IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES MUST BE RECYCLED OR DISPOSED OF IN A SAFE MANNER IN COMPLIANCE
WITH ALL APPLICABLE LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR LOCAL COUNTY SOLID WASTE AUTHORITY.

Advertising