Tributaries HDMI HX1C6-PRO - Manual (Page 4)

4. Operation Controls and Functions
Transmitter (TX) Unit
HDMI Input: Connect to the HDMI output of your source equipment such as a
DVD player or Set-top-box with an HDMI cable.
IR Emitter Input: Connect IR emitter cable (included) to this input. Place the
eye of the emitter within the range of the source equipment.
Power LED: This Power LED indicator will illuminate when the transmitter is
connected to its 5VDC power supply that is plugged into a wall outlet.
Link LED: This LED indicator will illuminate once the CAT6 cable has been
properly connected between the Transmitter and Receiver units
RJ45 Output: Connect a CAT6 cable terminated with an RJ45 modular plug
into this port
Power Input: Connect the 5VDC power supply to the transmitter of the
HX1C6-PRO. Then connector the adapter to an AC outlet.
4 3
1
2
3
4
5
6
1 2 4 3 5 6