I/o subsystem – Texas Instruments 51X User Manual

Page 42

Advertising
background image

4.2.2

I/O Subsystem

The I/O subsystem, implemented with an NS87334 VJG Super I/O
Controller Chip, provides for such functions as internal Hard Drive control,
floppy drive control, and serial and parallel ports. The Super I/O Controller
includes the following features:

•

100 percent compatible with ISA, EISA, and Micro-channel architectures

•

Built-in Floppy Disk Controller

•

Software compatible with the DP8473, the 765A and N82077

•

16-byte FIFO (default disabled)

•

Burst and Non-burst modes

•

Perpendicular Recording drive support

•

New high-performance internal digital data separator (no external
filter components required)

•

Low-power CMOS with enhanced power-down mode

•

Automatic media-sense support

•

Two UARTs

•

Software compatible with the PC16550A and PC16450

•

MIDI compatible

•

Infrared support on UART2 (IRDA

-compliant)

•

Bidirectional Parallel Port

•

Enhanced Parallel Port (EPP) compatible

•

Extended Capabilities Port (ECP) compatible, including level 2
support

•

Bidirectional under either software or hardware control

•

Compatible with ISA, EISA, and Micro Channel architectures

•

Ability to multiplex FDC signals on parallel port pins for external
FDD

•

Includes protection circuit against damage caused when printer is
powered up, or operated at higher voltages

•

Integral IDE controller

•

Provides a complete IDE interface with DMA control (except for
optional buffers)

Theory of Operation 4-3

Advertising