Topcom 301 - Manual (Page 6)

6 TOPCOM Baby Bottle Warmer 301
TOPCOM Baby Bottle Warmer 301
4.3 Warming function
The Baby Bottle Warmer 301 can be used to warm your baby’s hotchpotch.
• Pour the 150ml water into the warming basin .
• Put the baby food (max 150g) in the food cup .
• Put the food cup into warming basin .
• Position the cup cover on the food cup.
• Turn the thermostat to 100°C.
• The water will warm up to maximum 100°C. The water will heat and heat
the food.
• Stir regularly
• Disconnect power, let the device cool down and clean the steamer bowl
and cover immediately after use.
The cooking time and result can vary according to the size and quality
of the food. Exercise before use.
Do not put your hands over the holes as this may cause burn injuries.
Do not lift the cover during heating without wearing oven gloves.
Stir the food after heating to distribute the heat.
Always check the food temperature by testing some on the back of your hand.
4.4 Keep warm function
Once you have warmed your baby bottle or food, you can keep it warm.
•
Make sure that there is 150ml water in the warming basin .
• Put the baby bottle or the food cup into warming basin .
• Turn the thermostat to the desired temperature.
• The water will warm up and keep the baby bottle or food cup content on the selected temperature.
Do not keep the bottle longer warm than 1 hour.
Always check that the food temperature by testing some on the back of your hand.
5 Technical data
6 Cleaning
• Disconnect the device and allow it to cool down.
• Clean it with a soft cloth or slightly damp sponge.
• Never allow that water or any other liquid enters the device or accessories.
• Never use abrasive cleaners, brushes, gasoline, kerosene, glass polish or paint thinner to clean.
Power supply
Rated power
Temperature 100-240 V/AC/50-60 Hz
80W
Maximum 100°C (+/- 5°C)
40°C
70°C
100°C
OFF
90ml 60ml 30m l
150ml
4
3
3 4
6
4
3 4
6
UntitledBook1.book Page 6 Wednesday, November 26, 2008 2:32 PM